อุปกรณ์ BL Series Pumps Blackstone Dosing Pumps

อุปกรณ์ BL Series Pumps Blackstone Dosing Pumps

BL Series Pumps Blackstone Dosing Pumps

BL Series Dosing Pumps
BlackStone’s positive displacement solenoid driven pumps use a minimum number of moving parts, therefore reducing the chance of mechanical failure. Part wear and oiling associated with motor driven pumps (ball-bearings, gear drives and cams) are not a concern with these pumps. Blackstone pumps are more accurate than standard pumps due to the positive displacement design ensuring each stroke is identical to the strokes before and after it, thus keeping the flow rate consistent.
A wide range of BlackStone pumps with different dosing capacities are available for your specific dosing needs. Each pump is supplied with discharge and suction valves.
Versatility
BlackStone pumps have been designed to meet the ever changing needs of industry. With their broad, flat base and mounting holes for tank, shelf or floor mounting (horizontal), the pumps can be easily mounted anywhere in your plant. The rear of the pump housing also provides mounting holes to facilitate vertical mounting: wall, tank or machine. Since the pump valve assembly and controls for the unit are located on the front of the pump, there is never a problem with installation or flow adjustments.
Simple Operation
BlackStone pumps are equipped with a single control for pump output. The external flow rate control (potentiometer) on the face of the pump allows you to adjust the percentage of flow from 0 to 100% of the pump’s rated capacity. This feature eliminates the need to worry about stroke lengths and power settings. An LED indicator lights up each time a stroke begins, allowing the user to assess the stroke rate from a distance.
High Quality Materials
BlackStone pumps have been manufactured with the highest level of mechanical precision from materials chosen for their inherent ability to resist the effects of aggressive chemicals. When you select a Blackstone pump, you are eliminating the time consuming effort involved in picking the right material for your application. Blackstone pumps are supplied with the highest quality material as standard equipment—not optional. The diaphragm utilizes one-piece construction of PTFE, which unlike conventional laminated diaphragms, will stand up to the test of
time and wear. Ball valves are constructed in glass.
The pumphead and O-rings are made of PVDF, PTFE and FPM/FKM which offer unsurpassed resistance. The chemical resistance chart (right) shows how well PVDF and PTFE stand up to some of the most aggressive chemicals.
Rugged Design
Blackstone pumps are completely sealed during assembly and offer IP65 protection against splashes and spills providing excellent protection even in hostile environments. The fiber-reinforced polypropylene housing stands up to aggressive chemicals while offering superior strength under tough industrial conditions.

Order Information:
BL 1.5-1 1.5 LPH flow rate
BL 1.5-2 1.5 LPH flow rate
BL 3-1 2.9 LPH flow rate
BL 3-2 2.9 LPH flow rate
BL 5-1 5.0 LPH flow rate
BL 5-2 5.0 LPH flow rate
BL 7-1 7.6 LPH flow rate
BL 7-2 7.6 LPH flow rate
BL 10-1 10.8 LPH flow rate
BL 10-2 10.8 LPH flow rate
BL 15-1 15.2 LPH flow rate
BL 15-2 15.2 LPH flow rate
BL 20-1 18.3 LPH flow rate
BL 20-2 18.3 LPH flow rate

  • Specifications

Max Output  see above chart
Rated
Pressure BL 20 0.5 bar (7.4 psi)
BL 15 1 bar (14.5 psi)
BL 10 3 bar (43.5 psi)
BL 7 3 bar (43.5 psi)
BL 5 7 bar (101.5 psi)
BL 3 8 bar (116 psi)
BL 1.5 13 bar (188.5 psi)
Dosing
Frequency  120 strokes/min
Pump Casing  fiber-reinforced polypropylene
Materials  pumphead in PVDF, diaphragm in PTFE,
glass ball valves and O-rings in FPM/FKM,
polyethylene 5 x 8 mm tubing
Self-priming  max height: 1.5 m (5 feet)
Power Supply  110/115 VAC or 220/240 VAC, 50/60Hz
Max Power
Consumption  approximately 200 W
Protection  IP65
Environment  0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions  194 x 165 x 121 mm (7.6 x 6.5 x 4.8’’)
Weight  approx. 3 kg (6.6 lb.)

  • Accessories

Accessories
HI 721101  Pump head, O-ring, screws (6 pcs) and washers (6 pcs)
HI 721102  Discharge valve assembly
HI 721103  Suction valve assembly
HI 721004  Injection Valve Assembly
HI 721005  Foot Valve Assembly
HI 721008  Ceramic weight
HI 721104  Small Diaphragm
HI 721104  Small Diaphragm
HI 721106  Blackstone Pump Head Assembly

Quotation and Ordering

131 Thailand Science Park. Innovation Cluster 1 Building, Klong 1, Klong Luang, Pathumthani 12120 Thailand.Tel. +6681-847-6768, +662-191-3928 Fax +662-191-3929 Mr.Thoniwadh +6685-811-4779, Ms.Nareerat +6685-814-9653Email:info@highents.com

สนใจขอใบเสนอราคาและสั่งซื้อสินค้า

131 อุทยานวิทยาศาสตร์ประเทศไทย อาคารกลุ่มนวัตกรรม 1 ต. คลองหนึ่ง อ. คลองหลวง จ. ปทุมธานี 12120โทร. 081-847-6768, 02-191-3928 แฟกซ์ 02-191-3929 คุณโทณิวัฒน์ 085-811-4779, คุณนารีรัตน์ 085-814-9653Email : info@highents.com

 

  •  

    >>> ขอใบเสนอราคาแบบออนไลน์ คลิก !!

  • Scroll To Top

    Contact Us