อุปกรณ์วัด Multiparameter (GPS Multiparameter Meter with Fast Tracker™ Tag Identification Syst

อุปกรณ์วัด Multiparameter (GPS Multiparameter Meter with Fast Tracker™ Tag Identification System)

HI 98280

GPS Multiparameter Meter with Fast Tracker™ Tag Identification System

The HI 98280 multiparameter meter with GPS receiver monitors up to 13 different water quality parameters (6 measured, 7 calculated).  Measurements include pH, pH/mV, ORP, % saturation DO, mg/L DO, EC, absolute EC, resistivity, TDS, salinity, seawater specific gravity, atmospheric pressure and temperature.
Measurements from specific locations are tracked with detailed coordinate information that can be viewed immediately on the display. GPS information can be transferred to a PC using HANNA’s
HI 929828 software. GPS information can also be viewed by GPS mapping software such as Google™ maps*. Clicking on visited locations using mapping software such as Google™ Maps displays measurement information. The built-in 12 channel GPS receiver and antenna guarantees a position accuracy of 30 ft (10 m).
For measuring points within a 30 ft range or where GPS signals are not available, HI 98280’s Fast Tracker™ is invaluable for associating measurements with their locations. HANNA’s exclusive Fast Tracker™—Tag I.D. System monitors and records data using iButton®s that can be installed at any number of sampling sites.
The HI 98280 has a graphic, backlit LCD that automatically sizes the digits to fit the screen and allows full configuration of each parameter measured along with on-screen graphing capability. The meter incorporates comprehensive GLP features and the downloading of data via USB connection.
Each parameter is supported by on-screen context sensitive help, both in the calibration mode and during measurement.
Designed for outdoor environments, the meter is impact resistant and waterproof meeting IP67 standards (30 minutes immersion under 1 m of water). The multi-sensor probe can be left underwater in accordance with IP68 standards.
HI 769828 Multiparameter, Intelligent Probe
HANNA’s HI 769828 multiparameter probe incorporates a built-in microprocessor and amplifier that convert the high impedance signals from the sensors of the probe to eliminate common problems such as cable length limitations and noise associated with high impedance signals. This allows the probe to have a reliable communication with the meter and also immediately warns the user of problems such as a broken cable. The standard cable lengths of the probe are 4, 10 and 20 meters (13, 32 and 64 feet) and custom lengths are also available.
The probe also features HANNA’s Quick Calibration which allows the user to calibrate pH and conductivity with one solution in a single, simple step. Dissolved oxygen is also calibrated in  one step in saturated air. The probe houses 5 of the 6 measured parameters: pH, ORP, EC,  dissolved oxygen and temperature. The sensors are all independently replaceable and are easy to maintain and keep clean. The sensors are protected by an outer PVC/stainless steel sleeve and cap which is suitable for use in 2” wells. The probe housing complies with IP68 standard.
GPS (Global Positioning System) Enabled
The new HI 98280 features an internal 12 channel GPS receiver and antenna that calculates its position to track locations along with measurement data. The GPS tracks your location using satellites to within 30 ft (10 m).
GPS coordinates are shown on the LCD with up to 10 measurement parameters. The LCD also displays the GPS signal strength, number of satellites and logged data embedded with GPS coordinates.
Users can associate GPS coordinates with alphanumeric locations and distances between current location and predefined locations are displayed arranged by distance. In the case of GPS signal loss, the HI 98280 memorizes the last location and time.
HI 929828 PC Software manages logged data from the HI 98280 and displays GPS coordinates along with logged data.
Track Measurement Locations
Users can connect to GPS tracking software such as Google™ Maps* to view locations where samples have been taken. Measurement information is shown right on the map.
Fast Tracker™—Tag Identification System
HANNA’s Fast Tracker™—Tag Identification System simplifies test logging. iButton®s with a unique ID can be installed at various sampling sites. When the matching connector on the meter contacts the location button, measurements are logged and labeled with the alphanumeric user entered location ID. Location, date, time and measurements are logged into the meter which can be transferred to a PC. The Fast Tracker™ system complements the GPS for ultimate tracking.
Choose your configuration –

HI 982804-01 HI 9828 with GPS and 4 m (13.1’) probe cable, 115VAC
HI 982804-02 HI 9828 with GPS and 4 m (13.1’) probe cable, 230VAC
HI 9828010-01 HI 9828 with GPS and 10 m (33’) probe cable, 115VAC
HI 9828010-02 HI 9828 with GPS and 10 m (33’) probe cable, 230VAC
HI 9828020-01 HI 9828 with GPS and 20 m (66’) probe cable, 115VAC
HI 9828020-02 HI 9828 with GPS and 20 m (66’) probe cable, 230VAC
HI 9828030-01 HI 9828 with GPS and 30 m (98’) probe cable, 115VAC
HI 9828030-02 HI 9828 with GPS and 30 m (98’) probe cable, 230VAC
HI 9828040-01 HI 9828 with GPS and 40 m (131’) probe cable, 115VAC
HI 9828040-02 HI 9828 with GPS and 40 m (131’) probe cable, 230VAC
HI 9828050-01 HI 9828 with GPS and 50 m (164’) probe cable, 115VAC
HI 9828050-02 HI 9828 with GPS and 50 m (164’) probe cable, 230VAC
HI 9828060-01 HI 9828 with GPS and 60 m (200’) probe cable, 115VAC
HI 9828060-02 HI 9828 with GPS and 60 m (200’) probe cable, 230VAC
HI 9828070-01 HI 9828 with GPS and 70 m (230’) probe cable, 115VAC
HI 9828070-02 HI 9828 with GPS and 70 m (230’) probe cable, 230VAC
HI 9828080-01 HI 9828 with GPS and 80 m (262’) probe cable, 115VAC
HI 9828080-02 HI 9828 with GPS and 80 m (262’) probe cable, 230VAC
HI 9828090-01 HI 9828 with GPS and 90 m (295’) probe cable, 115VAC
HI 9828090-02 HI 9828 with GPS and 90 m (295’) probe cable, 230VAC

  • Specifications

pH Range 0.00 to 14.00 pH
Resolution 0.01 pH
Accuracy ±0.02 pH
mV of pH Input Range ±600.0 mV
Resolution 0.1 mV
Accuracy ±0.5 mV
ORP Range ±2000.0 mV
Resolution 0.1 mV
Accuracy ±1.0 mV
Dissolved
Oxygen Range 0.0 to 500.0% / 0.00 to 50.00 mg/L
Resolution 0.1% / 0.01 mg/L
Accuracy 0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading; 0.00 to 30.00 mg/L: ±1.5% of reading or 0.10 mg/L whichever is greater; 30.00 mg/L to 50.00 mg/L: ±3% of reading
Conductivity Range 0.000 to 200.000 mS/cm (absolute EC up to 400 mS/cm)
Resolution manual: 1 µS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm; automatic: 1 µS/cm from 0 to 9999 µS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm; automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm
Accuracy ±1% of reading or ±1 µS/cm whichever is greater
Resistivity Range 0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm
Resolution dependent on resistivity reading
TDS Range 0 to 400000 mg/L or ppm (the maximum value depends on the TDS factor)
Resolution manual: 1 mg/L (ppm); 0.001 g/L (ppt); 0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt); autorange scales: 1 mg/L (ppm) from 0 to 9999 mg/L (ppm); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt); autorange g/L (ppt) scales: 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
Accuracy ±1% of reading or ±1 mg/L (ppm) whichever is greater
Salinity Range 0.00 to 70.00 PSU (Extended Practical Salinity Scale)
Resolution 0.01 PSU
Accuracy ±2% of reading or 0.01 PSU whichever is greater
Seawater
Specific
Gravity Range 0.0 to 50.0 σt, σ0, σ15
Resolution 0.1 σt, σ0, σ15
Accuracy ±1 σt, σ0, σ15
Atm. Pressure Range 450 to 850 mmHg; 17.72 to 33.46 inHg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Resolution 0.1 mmHg; 0.01 inHg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Accuracy ±3 mmHg within ±15°C from the calibration temperature
Temperature Range -5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K
Resolution 0.01°C; 0.01°F; 0.01K
Accuracy ±0.15°C; ±0.27°F; ±0.15K
Calibration pH automatic one, two, or three points with five memorized standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or one custom buffer
ORP automatic at one custom point
Conductivity automatic one point with six memorized standards (84 µS/cm, 1413 µS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
DO automatic one or two points at 0, 100% or one custom point
Resistivity, TDS, σ based on conductivity or salinity calibration
Salinity one custom point
Atm. Pressure,
Temperature automatic at one custom point
Temperature
Compensation  automatic from -5 to 55°C (23 to 131°F)
Logging Memory  up to 60,000 samples with 13 measurements each; Up to 45,000 samples with 15 measurements each (GPS)
Logging Interval  1 second to 3 hours
Computer
Interface  USB (with HI 929829 software)
Waterproof
Protection  meter IP67, probe IP68
Environment  0 to 50°C (32 to 122°F); RH 100%
Power Supply  1.5V alkaline C cells (approximately 150 hours of continuous use without backlight) (4) / 1.2V rechargeable C cells (approximately 70 hours of continuous use without backlight) (4)
Dimensions
Meter/Probe  221 x 115 x 55 mm (8.7 x 4.5 x 2.2”) / 270 x 46 mm DIA (10.6 x 1.8” DIA)
Weight  meter: 750 g (26.5 oz.); probe: 750 g (26.5 oz.)

  • Accessories

Accessories
HI 7698281  USB Cable
HI 7698282  Probe Maintenance Kit
HI 7698283  Calibration Beaker
HI 7698284  Flow Cell
HI 710045  Power Supply Cable
HI 710046  Lighter Cigarette Cable
HI 929828  Software Application
HI 920005  iButton® Tags
Probes
HI 769828-0  pH Sensor
HI 769828-1  pH/ORP Sensor
HI 769828-2  DO Sensor
HI 769828-3  EC Sensor
Quick Calibration Solutions
HI 9828-27  Quick Calibration Solution, 1 Gallon
HI 9828-25  Quick Calibration Solution, 500 mL
pH Calibration Solutions
HI 7004L  4.01 pH Buffer Solution
1 x 500 mL bottle
HI 7007L  7.01 pH Buffer Solution
1 x 500 mL bottle
HI 7010L  10.01 pH Buffer Solution
1 x 500 mL bottle  ORP Calibration Solutions
HI 7021L  ORP Test Solution at (240 mV @ 25°C/77°F)
1 x 500 mL bottle
HI 7022L  ORP Test Solution at 470 mV @ 25°C/77°F)
1 x 500 mL bottle
Dissolved Oxygen Solutions
HI 7040L  Zero Oxygen Solution
HI 7042S  Electrolyte Solution for Galvanic Probes
Conductivity Calibration Solutions
HI 7030L  12880 µS/cm EC Solution, 500 mL Bottle
HI 7031L
1413 µS/cm EC Solution, 500 mL Bottle
HI 7033L  84 µS/cm EC Solution, 500 mL Bottle
HI 7034L  80000 µS/cm EC Solution, 500 mL Bottle
HI 7035L  111800 µS/cm EC Solution, 500 mL Bottle
HI 7039L   5000 µS/cm EC Solution, 500 mL Bottle
TDS Calibration Solutions
HI 7032L  1382 mg/L (ppm) TDS Bottle, 500 mL Bottle
HI 7036L  12.41 g/L (ppt) TDS Solution, 500 mL Bottle
Cleaning and Maintenance Solutions
HI 70300L  Electrode Storage Solution
1 x 500 mL bottle
HI 7061L  General Purpose Cleaning Solution
1 x 500 mL bottle

Quotation and Ordering

131 Thailand Science Park. Innovation Cluster 1 Building, Klong 1, Klong Luang, Pathumthani 12120 Thailand.Tel. +6681-847-6768, +662-191-3928 Fax +662-191-3929 Mr.Thoniwadh +6685-811-4779, Ms.Nareerat +6685-814-9653Email:info@highents.com

สนใจขอใบเสนอราคาและสั่งซื้อสินค้า

131 อุทยานวิทยาศาสตร์ประเทศไทย อาคารกลุ่มนวัตกรรม 1 ต. คลองหนึ่ง อ. คลองหลวง จ. ปทุมธานี 12120โทร. 081-847-6768, 02-191-3928 แฟกซ์ 02-191-3929 คุณโทณิวัฒน์ 085-811-4779, คุณนารีรัตน์ 085-814-9653Email : info@highents.com

 

  •  

    >>> ขอใบเสนอราคาแบบออนไลน์ คลิก !!

  • Scroll To Top

    Contact Us